Restore camera and radar accuracy after glass replacement so safety systems work as designed.
ADAS calibration restores precise alignment between the windshield-mounted camera, radar sensors, and Advanced Driver-Assistance Systems (ADAS) after windshield replacement, collision repair, or sensor disturbance. Even slight shifts in camera bracket position, mounting angle, or ride height can disrupt lane departure warning, adaptive cruise control, forward collision alert, and automatic emergency braking performance. Calibration reprograms sensor reference points and verifies that safety systems respond accurately to real-world driving conditions.
South Bay Auto Glass Repair performs ADAS calibration through AGSC-certified, factory-trained technicians who follow manufacturer-specified procedures and scanning protocols. Our team connects diagnostic equipment, initiates static or dynamic calibration sequences, verifies camera and radar alignment, and confirms system readiness without guesswork. ADAS calibration protects vehicle safety features, prevents warning light activation, and maintains reliable driver-assistance performance.
Fill out the form below and we'll get back to you within 24 hours
For immediate scheduling assistance or mobile service dispatch
Available through our website with real time availability confirmation
Schedule Online NowSouth Bay Auto Glass Repair offers complete ADAS calibration services for all vehicle safety systems. We perform the calibration method your vehicle requires (static, dynamic, or both) based on manufacturer specifications and the type of repair or service completed.
Windshield replacement requires recalibration of the forward-facing camera that controls lane keeping, collision warnings, and automatic braking. We recalibrate windshield-mounted cameras to restore safety feature accuracy after any glass replacement or camera-related work.
→ Get Windshield Camera Calibration DetailsStatic calibration is performed in a controlled indoor environment with your vehicle stationary. We use precision targets and laser measurements to calibrate cameras and radar sensors to factory specifications. Required after windshield replacement, bumper repairs, or any work affecting sensor mounting.
→ Get Static Calibration DetailsDynamic calibration is completed through a controlled test drive on marked roads. Your vehicle's sensors verify accuracy under real-world conditions at specific speeds. Required for lane departure systems, adaptive cruise control, and vehicles that need road-based verification after static calibration.
→ Get Dynamic Calibration DetailsOur ADAS calibration sets itself apart through OEM-compliant procedures, upfront pricing, same-day service availability, and documented pre-scan and post-scan verification for every vehicle. We combine precision execution with transparent accountability to ensure Advanced Driver-Assistance Systems (ADAS) perform exactly as manufacturer specifications require.
You receive clear calibration costs before service begins, with no surprise charges for diagnostic scans or verification steps.
We complete most ADAS calibrations within 1-2 hours with same-day appointment slots to minimize your vehicle downtime.
We scan for DTCs, confirm system status, and provide a calibration report for your records and service documentation.
We do not release your vehicle until post-scan confirms all ADAS systems pass calibration with no returning fault codes.
We bring professional calibration equipment to your location and perform on-site calibration when proper setup conditions can be met.
Choose our ADAS calibration to secure AGSC-certified, factory-trained technicians, professional grade scan tools, manufacturer specific software routines, and clear calibration reports without repeated attempts or hidden costs. Our ADAS calibration delivers precision sensor alignment using correct equipment and documented verification from pre diagnostic results through post scan status confirmation.
Our technicians calibrate with professional grade scan tools, calibration targets, laser alignment tools, and manufacturer specific software routines. We verify prerequisites that affect camera and radar performance, including windshield camera mounting, sensor bracket position, wheel alignment angles, and vehicle ride height. We perform calibration according to the vehicle's required method, not a one size approach.
We schedule fast, communicate clearly, and control downtime tightly. You receive a clear calibration report that shows pre diagnostic results, calibration confirmation, and post scan status. If your vehicle needs a wheel alignment or has a bent bracket that blocks calibration, we identify it early so you avoid repeated attempts. Expect clean work, accurate recalibration, and a service experience built around vehicle safety systems.
Watch for warning symptoms that indicate your vehicle needs ADAS calibration after glass work, collision repair, suspension work, or bumper removal. Camera or sensor reference points change when mounting positions shift, and the ADAS system shows faults when sensors no longer align to factory specifications.
ADAS calibration can correct a forward camera that reads lane markings late, reacts to road surface changes, or shows lane position offset. You may notice the lane warning timing feels inconsistent.
Calibration services can address a radar or camera that triggers collision warning too soon, too late, or only in heavy traffic. You might also see FCW or AEB warnings on the dashboard.
ADAS calibration can restore adaptive cruise control performance when the vehicle follows too close, brakes unexpectedly, or shows ACC unavailable messages after a windshield replacement or front-end repairs.
Calibration may be required when blind spot monitoring misses vehicles in adjacent lanes or throws intermittent warnings after a side impact, bumper work, or sensor replacement.
A diagnostic scan may show fault codes tied to camera alignment, radar aiming, yaw rate zero point, or steering angle sensor calibration. You may also see camera occluded alerts from dirt, tint film edges, or a misaligned windshield camera bracket.
We perform ADAS calibration using OEM-approved calibration tools, diagnostic scan systems, windshield glass, and service software from recognized automotive equipment manufacturers.
We use calibration equipment and scan systems from Autel, Bosch, Hunter Engineering, Snap-on, Launch Tech, Hella Gutmann, and Texa to run OEM-guided camera calibration and radar aiming routines. We also work with laminated windshield glass from Pilkington and Fuyao, which supports proper optical clarity and correct ADAS camera operation through the windshield.
We access OEM service information portals and OEM-aligned calibration software to position calibration targets, run diagnostic procedures, and generate calibration reports that document windshield-mounted camera and radar sensor alignment.
Pilkington & Fuyao Laminated Windshield Glass
Our ADAS calibration process follows OEM service information through five measured workflow steps with repeatable checks and documented results at each stage. We verify your safety systems from vehicle check in through post scan documentation to confirm complete sensor restoration.
Vehicle check in and service interview
We confirm the vehicle, ADAS features, repair history, and the reason for calibration services. We check the windshield camera condition, sensor windows, and any visible bracket damage.
Pre scan diagnostics
We connect a scan tool through the OBD II connector, record DTCs, and capture freeze frame data when available. We confirm that modules communicate and note any existing faults.
Prerequisite verification
We verify tire pressure, ride height, wheel and tire condition, and camera lens cleanliness. We check alignment related concerns that can affect calibration, including toe and thrust angle.
Calibration setup and execution
We perform static calibration with target boards and exact measurements, or dynamic calibration with a controlled test drive when required. We follow the manufacturer calibration routine and confirm pass status.
Post scan and documentation
We clear codes when appropriate, rerun scans, and confirm no returning ADAS faults. You receive a calibration report that supports vehicle safety and service requirements.
ADAS calibration adjusts vehicle cameras, radar, and sensors to factory specifications after windshield replacement or collision repair. Calibration aligns lane departure systems, sets forward collision warning distance, and times automatic emergency braking correctly. Proper calibration restores system accuracy and ensures advanced driver assistance systems operate safely.
You need calibration after windshield replacement, collision repair, bumper removal, camera or radar replacement, wheel alignment changes, or suspension work that affects ride height and sensor angles.
Calibration works through a scan tool guided routine. Static calibration uses targets and exact measurements in a controlled bay. Dynamic calibration is completed through a test drive under the required speed range and lane marking conditions.
Mobile calibration can work when the vehicle and site meet requirements for level ground, spacing, lighting, and target placement. Some vehicles still require in shop conditions for static calibration accuracy.
ADAS calibration can clear warning lights when faults relate to camera aiming, sensor alignment, or lost learned values, and the post-calibration scan shows no returning diagnostic trouble codes (DTCs). Calibration does not fix hardware faults. Bent brackets, poor mounting alignment, or failed sensors require repair before recalibration will clear warnings.
| Popular Services | Common Requests | Specialized Repairs |
|---|---|---|
|
ADAS Calibration ADAS Calibration Services ADAS System Calibration Mobile ADAS Calibration Camera Calibration |
Dynamic Calibration Static ADAS Calibration Radar Calibration Windshield Camera Calibration Windshield Recalibration |
Adaptive Cruise Control Blind Spot Monitoring Lane Departure Warning Pre Scan and Post Scan Calibration Report |